x x

 INFECTIOUS DISEASE

BACTERIOLOGY IMMUNOLOGY MYCOLOGY PARASITOLOGY VIROLOGY

VIDEO LECTURE

IMMUNOLOGY -  CHAPTER  EIGHT 

ANTIBODY FORMATION 

Dr Gene Mayer

        File formatted for Smart Phone

EM PORTUGUES - PORTUGUESE

Let us know what you think
FEEDBACK

SEARCH

  

Logo image Jeffrey Nelson, Rush University, Chicago, Illinois  and The MicrobeLibrary

Last major update July 2010

READING
Male et al. Immunology
7th edition  pp 172-180

TEACHING OBJECTIVES
To describe general characteristics of the specific immune response
To compare and contrast primary and secondary antibody responses
To describe the molecular events involved in class switching and membrane immunoglobulin expression

GENERAL CHARACTERISTICS OF THE ANTIBODY RESPONSE

Self / non-self discrimination

One characteristic feature of the specific immune system is that it normally distinguishes between self and non-self and only reacts against non-self.

Memory

A second feature of the specific immune response is that it demonstrates memory. The immune system "remembers" if it has seen an antigen before and it reacts to secondary exposures to an antigen in a manner different than after a primary exposure. Generally only an exposure to the same antigen will illicit this memory response.

Specificity

A third characteristic feature of the specific immune system is that there is a high degree of specificity in its reactions. A response to a particular antigen is specific for that antigen or a few closely related antigens.

N.B. These are characteristic of all specific immune responses.  

 

KEY WORDS
Equilibrium phase
Primary response
Steady state phase
Class switching
Catabolic decay phase
Lag/inductive phase
Decline phase
Immune elimination phase
Log phase
Secondary/anamnestic response

ab1-1.jpg (57829 bytes) Figure 1

ANTIBODY FORMATION

Fate of the immunogen

Clearance after primary injection
The kinetics of antigen clearance from the body after a primary administration is depicted in Figure 1.

Equilibrium phase
The first phase is called the equilibrium or equilibration phase. During this time the antigen equilibrates between the vascular and extravascular compartments by diffusion. This is normally a rapid process. Since particulate antigens don't diffuse, they do not show this phase.

Catabolic decay phase
In this phase the host's cells and enzymes metabolize the antigen. Most of the antigen is taken up by macrophages and other phagocytic cells. The duration will depend upon the immunogen and the host.

Immune elimination phase
In this phase, newly synthesized antibody combines with the antigen producing antigen/antibody complexes which are phagocytosed and degraded. Antibody appears in the serum only after the immune elimination phase is over.

Clearance after secondary injection
If there is circulating antibody in the serum, injection of the antigen for a second time results in a rapid immune elimination. If the is no circulating antibody then injection of the antigen for a second time results in all three phases but the onset of the immune elimination phase is accelerated.

ab1-2.jpg (55901 bytes)  Figure  2

 

Kinetics of antibody responses to T-dependent Antigen

Primary (1o) Antibody response
The kinetics of a primary antibody response to an antigen is illustrated in Figure 2.

Inductive, latent or lag phase
In this phase, the antigen is recognized as foreign and the cells begin to proliferate and differentiate in response to the antigen. The duration of this phase will vary depending on the antigen but it is usually 5 to 7 days.

Log or Exponential Phase
In this phase, the antibody concentration increases exponentially as the B cells that were stimulated by the antigen differentiate into plasma cells which secrete antibody.

Plateau or steady-state phase
In this phase, antibody  synthesis is balanced by antibody  decay so that there in no net increase in antibody  concentration.

Decline or decay phase
In this phase, the rate of antibody degradation exceeds that of antibody  synthesis and the level of antibody  falls. Eventually the level of antibody may reach base line levels.

ab1-3.jpg (64889 bytes)  Figure  3

Secondary (2o), memory or anamnestic response (Figure 3)

Lag phase
In a secondary response, there is a lag phase by it is normally shorter than that observed in a primary response.

Log phase
The log phase in a secondary response is more rapid and higher antibody  levels are achieved.

Steady state phase

Decline phase
The decline phase is not as rapid and antibody  may persist for months, years or even a lifetime.

 

Specificity of 1o and 2o responses

Antibody elicited in response to an antigen is specific for that antigen, although it may also cross react with other antigens which are structurally similar to the eliciting antigen. In general secondary responses are only elicited by the same antigen used in the primary response. However, in some instances a closely related antigen may produce a secondary response, but this is a rare exception.
 

ab1-4a.jpg (90453 bytes)  Figure 4

 

Qualitative changes in antibody during 1o and 2o responses

Immunoglobulin class variation
In the primary response, the major class of antibody produced is IgM whereas in the secondary response it is IgG (or IgA or IgE) (Figure 4). The antibodies that persist in the secondary response are the IgG antibodies.

ab1-5.jpg (77280 bytes)  Figure  5

Affinity
The affinity of the IgG antibody produced increases progressively during the response, particularly after low doses of antigen (Figure 5). This is referred to as affinity maturation. Affinity maturation is most pronounced after secondary challenge with antigen.

ab1-6.jpg (228413 bytes)  Figure  6

One explanation for affinity maturation is clonal selection as illustrated in Figure 6. A second explanation for affinity maturation is that, after a class switch has occurred in the immune response, somatic mutations occur which fine tune the antibodies to be of higher affinity. There is experimental evidence for this mechanism, although it is not known how the somatic mutation mechanism is activated after exposure to antigen.

Avidity
As a consequence of increased affinity, the avidity of the antibodies increases during the response.

Cross-reactivity
As a result of the higher affinity later in the response, there is also an increase in detectible cross reactivity. An explanation for why increasing affinity results in an increase in detectible cross reactivity is illustrated by the following example.

 

   

Affinity of Ab for Ag

   Early  Late
Immunizing Ag  10-6  10-9
+ ++
Cross reacting Ag  10-3 10-6
- +
  

If a minimum affinity of 10-6 is needed to detect a reaction, early in an immune response the reaction of a cross reacting antigen with an affinity of 10-3 will not be detected. However, late in a response when the affinities increase 1000 fold, the reaction with both the immunizing and cross reacting antigens will be detected.

 

ab1-7.jpg (81147 bytes)  Figure  7

Cellular events during 1o and 2o responses to T-dependent antigen

Primary response (Figure 7)

Lag phase
Clones of T and B cells with the appropriate antigen receptors bind antigen, become activated and begin to proliferate. The expanded clones of B cells differentiate into plasma cells which begin to secrete antibody.

Log phase
The plasma cells initially secrete IgM antibody since the Cμ heavy chain gene is closest to the rearranged VDJ gene. Eventually some B cells switch from making IgM to IgG, IgA or IgE. As more B cells proliferate and differentiate into antibody secreting cells the antibody concentration increases exponentially.

Stationary phase
As antigen is depleted, T and B cells are no longer activated. In addition, mechanisms which down regulate the immune response come into play. Furthermore, plasma cells begin to die. When the rate of antibody synthesis equals the rate of antibody decay the stationary phase is reached.

Decline phase
When no new antibody is produced because the antigen is no longer present to activate T and B cells and the residual antibody slowly is degraded, the decay phase is reached.

ab1-8.jpg (142158 bytes)  Figure 8

ab1-9.jpg (61463 bytes)  Figure  9

Secondary response (Figure 8)

Not all of the T and B cells that are stimulated by antigen during primary challenge with antigen die. Some of them are long lived cells and constitute what is refer to as the memory cell pool. Both memory T cells and memory B cells are produced and memory T cells survive longer than memory B cells. Upon secondary challenge with antigen not only are virgin T and B cells activated, the memory cells are also activated and thus there is a shorter lag time in the secondary response. Since there is an expanded clone of cells being stimulated the rate of antibody production is also increased during the log phase of antibody production and higher levels are achieved. Also, since many if not all of the memory B cells will have switched to IgG (IgA or IgE) production, IgG is produced earlier in a secondary response. Furthermore since there is an expanded clone of memory T cells which can help B cells to switch to IgG (IgA or IgE) production, the predominant class of Ig produced after secondary challenge is IgG (IgA or IgE).

 

Ab response to T-independent antigen

Responses to T-independent antigen are characterized by the production of almost exclusively IgM antibody and no secondary response. Secondary exposure to the antigen results in another primary response to the antigen as illustrated in Figure 9.

 

ab1-10.jpg (111918 bytes)  Figure  10

Class switching

During an antibody response to a T-dependent antigen a switch occurs in the class of Ig produced from IgM to some other class (except IgD). Our understanding of the structure of the immunoglobulin genes, helps explain how class switching occurs (Figure 10).

During class switching another DNA rearrangement occurs between a switch site (Sμ) in the intron between the rearranged VDJ regions and the Cμ gene and another switch site before one of the other heavy chain constant region genes. The result of this recombination event is to bring the VDJ region close to one of the other constant region genes, thereby allowing expression of a new class of heavy chain. Since the same VDJ gene is brought near to a different C gene and since the antibody specificity is determined by the hypervariable regions within the V region, the antibody produced after the switch occurs will have the same specificity as before.

Cytokines secreted by T helper cells can cause the switch to certain isotypes.

 

ab1-11.jpg (94718 bytes)   Figure  11

Membrane and secreted immunoglobulin

The specificity of membrane immunoglobulin on a B cell and the Ig secreted by the plasma cell progeny of a B cell is the same. An understanding of how the specificity of membrane and secreted Ig from an individual B cell can be the same comes from an understanding of immunoglobulin genes (Figure 11).

There are two potential polyA sites in the immunoglobulin gene. One after the exon for the last heavy chain domain and the other after the exons that code for the trans- membrane domains. If the first polyA site is used, the pre-mRNA is processed to produce a secreted protein. If the second polyA site is used, the pre-mRNA is processed to produce a membrane form of the immunoglobulin. However, in all cases the same VDJ region is used and thus the specificity of the antibody remains the same. All C regions genes have these additional membrane pieces associated with them and thus after class switching other classes of immunoglobulins can be secreted or expressed on the surface of B cells.

 

  

Return to the Immunology Section of Microbiology and Immunology On-line

 

This page copyright 2011, The Board of Trustees of the University of South Carolina
This page last changed on Tuesday, May 24, 2011
Page maintained by
Richard Hunt